Chainrings

UL Chainrings are the lightest 1x XC/Gravel chainrings on the market. Using the SL Chainring as the platform, we tweaked the arm design and strategically machined the chainring so that only minimal sacrifice was made in impact strength for large gains in weight reduction. - Direct Mount chainring for XCX, TRS, and LG1 cranks - Updated M3 narrow-wide tooth profile eliminates chain noise, and decreases overall system wear while retaining chain - 10/11/12 speed. Compatible with both Shimano and SRAM 12-speed drivetrains - Provides Boost 148mm chainline on XCX Mountain cranks and 142mm chainlines on XCX Gravel cranks - Provides chainline for Superboost spacing on TRS and LG1 cranks UL Chainrings are not compatible with Helix cranks. Helix cranks require Helix rings available soon.

The SRAM X-Sync Steel 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-Sync technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Compatibility: Compatible with all SRAM 1x cranks, DM 28-tooth ring is not compatible with 30mm cranks that require a 0mm offset ring

Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders. - Compatible with 9, 10, 11, and 12 speed - Narrow Wide tooth profiling ensures consistent chain retention - Lockring installed/removed with ISIS BB tool - Stiff 4mm plate thickness to transfer loads without flexing

- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: ANT USB

The Wolf Tooth 76 BCD chainrings work great on any 76 BCD spider or crankset. These will replace the more expensive rings used on SRAM XX1 spiders or other manufacturer's spiders such as Cannondale. Also a great fit on the Specialized Stout crankset. - Fits any 76 BCD crankset or spider - Drop-Stop® technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Note - Use standard M8 chainring bolts, not the M8.5 bolts included with XX1 spiders. Our patented Drop-Stop tooth design provides superior chain retention, wear life and mud-shedding capability. Compatibility: - These rings fit any SRAM 76 BCD spider or Specialized Stout crankset. Here are instructions on how to measure your BCD. - Threaded for standard M8 chainring bolts. For the XX1 spider, we recommend the 6mm bolts (or any short M8 chainring bolt). For the Stout crankset we recommend the 10mm bolts or the bolts that come with the crankset. - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Use Drop-Stop A or B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains DROP-STOP A Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. Recommendations If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck Tech Specs: - Weight: 30t/45g | 32/51g - Material: 7075-T6 aluminum - Made in the USA

More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you're climbing. We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. Compatibility: - These rings are for use with 110 BCD 5 arm cranksets. - Crank arm clocking arrow will be rotated 180 degrees from normal on cranksets that have 4 bolts visible and 1 hidden bolt behind the crank arm like for SRAM. - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability - Chainline - varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring) - Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position. - Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting. - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B - Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC - Not compatible with 12s Shimano HG+ chains Recommendations - - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck. - Recommend the use of a clutch style rear derailleur for the best chain security. Tech Specs: - Weight: 36t/58g | 38t/66g | 40t/74g | 42t/81g - Material: 7075-T6 aluminum - Made in the USA

Looking for a SRAM XO1, X1, GX, and NX chainring with the proven chain retention of our patented Drop-Stop® chainrings? Wolf Tooth has what you need in these beautifully machined 94 BCD bolt-on chainrings. - Fits any 94 BCD SRAM crankset - Drop-Stop® technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings fit any SRAM mountain bike crankset with a 94 BCD. Note that we also offer SRAM direct mount chainrings for standard, boost and BB30 short spindle cranksets and some stainless steel versions. - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - Chainline - 49mm - Provides a great chainline on most boost bikes. Use Drop-Stop A or B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains DROP-STOP A Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 30t • 44g | 32t • 54g | 34t • 63g - Material: 7075-T6 aluminum - Made in the USA - US Patent 958123

Looking for a 1X chainring for your new Shimano XT, SLX or Deore crankset with the proven chain retention of our Drop-Stop® chainrings? Wolf Tooth has what you need in the form of a beautifully machined asymmetrical 96 mm BCD that provides the ideal 1X chainline of 49mm. Note - The 28T and 26T sizes will mount to the inner 64 BCD mounting position on these cranksets. Compatibility: - These rings fit on the Shimano XT M8000, SLX M7000, Deore M6000, or FC M5100 1x or 2x cranksets - Not compatible with Deore triple (3x) cranksets - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most Boost bikes. See this explanation for details. - Drop-Stop A models will reduce the chainline (inward towards the frame) from the Shimano specified chainline for the crankset: 26T-28T = -3mm, 30T-34T = -2mm, and 36T-38T = -1mm - Drop-Stop ST models will have the same chainline as the Shimano specified chainline - 10mm bolts are optimized for mounting this ring - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 26t/42g | 28t/50g | 30t/41g | 32t/50g | 34t/59g | 36t/69g - Material: 7075-T6 aluminum - Made in the USA

Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on-road applications with the giant 50t rings. Fits 110 BCD 5 arm cranksets Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings are for use with 110 BCD 5-arm cranksets. - Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting. - Chainline - varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring) Recommendations - Recommend the use of a clutch-style rear derailleur for the best chain security. - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! - Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 34t/44g | 36t/58g | 38t/66g | 40t/74g | 42t/81g | 44t/90g | 46t/107g | 48t/115g | 50t/125g - Material: 7075-T6 aluminum - Made in the USA

Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond cyclocross to commuting, gravel riding, and even full on-road applications with the giant 52t rings. - Fits 130 BCD 5 arm cranksets - Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings are for use with 130 BCD 5-arm cranksets. - Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800 - Not compatible with Campy CX10/11. - SRAM Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features a fifth bolt with 1x specific shoulder. This kit can be found online. - 38T important note: The chain may contact the spider arm slightly when using the 38T chainring (see last photo in the product images). We recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for 39T smallest ring. - Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting. Tech Specs: - Weight: 38t/52g | 40t/60g | 42t/62g | 44t/79g | 52t/132g - Material: 7075-T6 aluminum - Made in the USA - This 1x chainring and can be mounted in either the inner or outer ring position of a double crankset but can not be used in a 2x setup. - Chainline - The most common mounting is in the outer ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring) Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.

The 102BCD chainring was made specifically for the XTR M960 crankset - Only fits on the M960 crankset in the middle ring position - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings only fit on the M960 crankset in the middle ring position - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - 6mm chainring bolts needed - Chainline: 50mm - Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy Recommendations - If you plan to ride in very muddy conditions, try using a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck Tech Specs: - Weight: 32t/47g - Material: 7075-T6 aluminum

More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power while behaving like a 32T chainring when you're climbing. We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. These chainrings are for Shimano direct mount cranks. The Wolf Tooth chainrings feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Compatibility - Shimano XTR M9100, XT M8100, and SLX M7100 series 12 speed cranksets. - Our chainring offset matches the offset of Shimano chainrings to replicate the intended chainline for the crankset. - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12s SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12s SRAM Transmission (T-Type) Flattop, 12s Shimano HG+, or 12s Campy DROP-STOP B - Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC - Not compatible with 12s Shimano HG+ chains DROP-STOP ST - Compatible with 12s Shimano Hyperglide+ chain and 12s KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 32/65g - Material: 7075-T6 aluminum - Made in the USA

These chainrings are for Easton or Race Face Cinch cranks. Updated tooth profile works with SRAM Flattop chain. The Wolf Tooth Cinch chainrings feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Compatibility: - Easton Cinch™ cranksets including EC90SL - Works with SRAM Flattop chain - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 38t/80g | 40t/91g | 42t/96g | 44t/113g | 46t/129g | 48t/139g | 50t/149g - Material: 7075-T6 aluminum - Made in the USA

FSA Super Road Chainrings are designed to provide flawless shifting, with minimal weight and unmatched durability. - Precision CNC machined AL7075/T6 alloy

Engingeered to interface with Bosch motor systems, SRAM drivetrain engineers optimized this ring to combat the high-torque, high-wear situations e-bike riders face. The aggressive T-Type tooth design provides better chain retention for a smoother, more efficient pedal feel with a focus on long wear-life. - Steel (36T,38T). - AeroGuard Compatible that fufills EN 15194:2017 standard - Backwards compatible with other Eagle Technology.

Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.1mm thick so they work well with 9-speed chains.

absoluteBLACK Silver Series Oval 110 BCD Chainrings feature many of the same benefits as absoluteBLACK's Premium line, but with less material machined out on the outer side, allowing for easier maintenance and cleaning. They are designed for Shimano 4-bolt cranks, such as Dura-Ace 9000, Ultegra 6800, 105 5800, and others. Optimized with smooth shifting in mind, these chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Designed for your winter/training bike where weight is not an issue but ease of cleaning is - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing

absoluteBLACK Premium Oval 110 BCD Road Chainrings utilize absoluteBLACK's top-tier design features to greatly improve traction and speed. They are designed for Shimano Dura-Ace 9100, Ultegra 8000, & 105 R7000 4-bolt cranks only. Optimized with smooth shifting in mind, premium chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing - 10, 11, and 12-speed compatible - Ramps are designed specifically for a 50/34 combination - If only switching the inner chainring to oval, use all original crank bolts - 6.5% ovality is ideal for road climbing

absoluteBLACK Premium Oval 110 BCD Road Chainrings utilize absoluteBLACK's top-tier design features to greatly improve traction and speed. They are designed for Shimano Dura-Ace 9100, Ultegra 8000, and 105 R7000 4-bolt cranks only. Optimized with smooth shifting in mind, premium chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing - 10, 11, and 12-speed compatible - Outer rings feature 6-point shifting ramps that work in conjunction with the tooth recesses to stabilize the chain while shifting and allow for easy and quick gear changes - Outer chainrings also features 12 down-shifting points - Use absoluteBLACK long chainring bolts to install outer ring

absoluteBLACK Premium Oval 110 BCD Chainrings utilize absoluteBLACK's top-tier design features to greatly improve traction and speed. They are designed for 4-bolt or 5-bolt FSA cranks such as Gossamer, SL-K, and K-Force with asymmetric bolt spacing. 4- and 5-bolt cranks are identical with the exception of the one hidden bolt behind the crank arm in 5-bolt design, which is not needed. Optimized with smooth shifting in mind, premium chainrings have a unique shift ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing - For Gossamer and SL-K cranks, use the original FSA hardware for installation - For K-Force cranks, you will need to purchase absoluteBLACK bolt covers for installation - 3.5% ovality is ideal for road climbing

absoluteBLACK Premium Sub-Compact 110 BCD Oval Chainrings are designed to improve your climbing and cadence. They are compatible with all Shimano 110 BCD 4-bolt cranks. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Sub-Compact chainrings only work in predefined size combinations: 46/30 or 48/32 - Mounting bolts are included with the small ring - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing - Use Shimano Dura-Ace 11-speed chain or SRAM Eagle 12-speed chain for proper clearance of mounting tabs - Not compatible with SRAM Yaw front derailleurs - 10, 11, and 12-speed compatible - 9% ovality is ideal for climbing

absoluteBLACK Premium Oval 110 BCD Chainrings utilize absoluteBLACK's top-tier design features to greatly improve traction and speed. They are designed for 4-bolt or 5-bolt FSA cranks such as Gossamer, SL-K, and K-Force with asymmetric bolt spacing. 4- and 5-bolt cranks are identical with the exception of the one hidden bolt behind the crank arm in 5-bolt design, which is not needed. Optimized with smooth shifting in mind, premium chainrings have a unique shift ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing - For Gossamer and SL-K cranks, use the original FSA hardware for installation - For K-Force cranks, you will need to purchase absoluteBLACK bolt covers for installation - 3.5% ovality is ideal for road climbing

612 Track rings are the perfect compliment to any 144mm B.C.D. crankset. They are made from 7000 series aluminum and feature a lovely and durable anodized finish. - BCD: 144 - Chain Compatibility: 1/2-inch x 1/8-inch

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations. - Chainring can be used with FSA SL-K direct mount outer chainrings - Precision CNC machined AL7075/T6 - Shifting ramps and stainless steel pins on outer rings - Compatible with Modular crankset (Gossamer/Energy / SL-K / K-FORCE) - Laser-etched logo - Material: Aluminum - Ring Position/Type: Inner - Drivetrain Speeds: 11 - Chainring BCD: 90mm

Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains. - 7000 series aluminum provides strength and durability - 130mm BCD

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

12 Good Reasons If you're looking for a bomber new chainring that can run with your Shimano 12 speed drivetrain, then look no further. This direct mount ring has the versatility of RF CINCH integration and the stiffness to turn all your "push" into straight-up "go". Built to Last Created from 4mm-thick 7075-T6 alloy plate for big-time stiffness and strength. Its NW tooth profile is Shimano 12-speed specific and provides secure chain retention All-Round Performer The Race Face CINCH interface makes this direct mount chainring fast and easy to swap for different sizes to customize your Shimano 12-speed drivetrain. - Compatible with Cinch Direct Mount Cranks - 7075 Aluminum - Direct Mount

- Stock for 07-08 Record and Chorus 10-speed compact and standard cranksets - Ultra-Drive ESP alloy chainrings with anti-friction treatment and ramps/pins - *Campagnolo compact rings are Ultra-Torque specific BCD - Color: Grey

The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a more reinforced outer chainring on its unique asymmetrical four-arm spider construction. - Chainring BCD: 110 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Outer