Accessories

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. And for simple and durable storage, the components of this tool also nest inside of the handle. - Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle. - Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing. - Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required. - Works on 12mm thru axle bikes

While the classic seat pack is a great place to store little-used essentials out of the elements, their mounting systems can interfere with and often damage modern dropper seatposts. Valais allows the use of a traditional seatbag on a dropper seatpost. - Allows the usage of seat packs on a dropper post - Protects the dropper stanchion from wear and grit - Can act as a travel limiter when full drop isn't needed - Sized by stanchion diameter

- Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors

This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually

Precision-machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components during service. Designed by Barnett Bicycle Institute and manufactured by Wheels Manufacturing. Kit includes 3 pairs of shaft clamps to fit 15 shaft diameters from 8mm to 28.6mm For use with: - Suspension damper shafts - Suspension damper cylinders - Suspension air-spring cylinders - Suspension piston shafts - Thru-axles Clamp 10-006 fits - 8mm - 9mm - 10mm - 12.7 - 15mm - 15.9mm - 16.7mm Clamp 10-007 fits - 17.5mm - 18.7mm - 19.5mm - 21mm - 22.2mm Clamp 10-008 fits - 23.8mm - 25.4mm - 28.6mm

Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step

This do-it-all universal bottom bracket press is designed to press in all current Wheels Mfg. bottom brackets. Economical and easy to use, this tool is made up of two machined aluminum handles, a 1/2-inch threaded rod, and two machined aluminum drifts. Each drift is machined with multiple steps to fit common bottom bracket shell and bearing diameters. No more searching for the correct size drifts and parts—just match up the drift to your frame's BB shell size and your bottom bracket's bearing size, and press away. - Zinc-plated 1/2-inch diameter threaded rod resists bending, allowing for the cups to align and press in straight - Drifts can also can be used as a frame bottom bracket shell sizing guide - Machined aluminum handles and drifts - Red anodized drifts and handles - Steps on drift are marked with diameter sizes - Works with BB shells up to 132mm wide - Includes two universal BB drifts

High-quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. "Take-it-easy" Tool Finder: color coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. - Hexagonal screwdriver hex-plus - Multi-component Kraftform handle for fast and ergonomic screwdriving - Take-it-easy tool finder: color coding according to profile and size - Hex-plus allows socket head screws to live longer - Hexagonal anti-roll feature against rolling away

High-quality L-keys for recessed TORX screws. Comes with a holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screws on the tool at both ends. The BlackLaser surface treatment provides outstanding corrosion protection and a long service life. Available in a practical clip fastener, whose wear-free material provides secure storage for the L-keys and enables simple removal. - Holding function for recessed TORX screws - BlackLaser surface treatment for corrosion resistance - "Take-it-easy" tool finder: color coding by size - Color coded, easy-to-grip plastic sleeve, even at low temperatures - Includes: 1x TX 8x76 mm, 1x TX 9x79 mm, 1x TX 10x85 mm, 1x TX 15x90 mm, 1x TX 20x96 mm, 1x TX 25x104 mm, 1x TX 27x112 mm, 1x TX 30x122 mm, 1x TX 40x132 mm

Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.

Wald's 742 training wheels feature three slots on the brace arm allowing this wheel set to mount on most single speed bicycles with 16- to 26-inch wheels. The brace arms are designed to fit rear frames tubes up to .75 inches in diameter. This model is intended for use by riders weighing up to 125 pounds. - The Wald Training Wheels fit 16- to 26-inch bicycles. - The Wald Training Wheels support riders up to 125 pounds.

- Pliers developed specially for cutting shift and break housing. Pliers cut precise and smooth without deformation to the cable housing and feature a build in crimping function for cable end caps. - In order to preserve the ultimate cutting performance, we highly advice not to use pliers for cutting shift/brake wires and spokes.

- Master link pliers are for commonly used chains with master link, SRAM Powerlink or the KMC Missing Link

This is a race hydration backpack streamlined to go superlight and almost invisible on your back. The OUTLANDER 2 is geared-up with the award winning No Dancing Monkey 4-point harness that makes the pack 100% bounce free in action. The stretch support of the harness allows you the freedom to move in full speed and in any gnarly condition. - Zero bounce with NDM 1.0 harness-Our patented harness system with 4-point performance suspension - Only the essentials-Stay as lightweight as possible with a slick 2L hydration pack - 1.5L / 50oz Elite Hydration Bladder included with fixed tube coupling THE MOUNTAINBIKE BACKPACK GIVING YOU THE EDGE WHEN RACING The OUTLANDER 2 is a mountain bike backpack designed for pro riders going superlight at marathon distances. But honestly, the hydration pack will fit any rider perfectly who’s searching for a bad-ass backpack with hydration that won’t cramp you speed or style. This pack is a racer and we guarantee you will love it, no matter if you are a pro or a happy amateur rider. STAY HYDRATED IN ACTION To keep you hydrated and focused while on the move, we picked a durable 1.5 / 50oz liter Elite hydration bladder to go inside the pack, with a big slide opening at the top for quick filling of ice and water. And after the race, the bladder is fully reversible for easy cleaning and drying. The Hydraflex drinking tube sits securely close at hand with the tube clips.

VERTICAL 10 is a lightweight hydration pack supplying 10L of storage capacity to keep you trail running full speed all day and night. Equipped with soft mesh highly ventilated shoulder and chest straps, built on our bounce free No Dancing Monkey 4-point harness system offering the best fit available in the market. - No Dancing Monkey 1.0 Harness-Zero bounce with our patented NDM technology - 2L Hydration system-Elite hydration bladder included. TRAIL RUNNING BACKPACK WITH HYDRATION VERTICAL 10L Plus is a lightweight hydration backpack designed for the performance minded, trail running enthusiast who needs 10L of storage capacity to carry personal gear and hydration. Equipped with soft mesh, highly ventilated shoulder and chest straps that allow normal breathing capacity and freedom to move. The lightweight back panel is also made with cool, breathable mesh. The Vertical 4L Plus offers the best fit available in the market with our award winning NDM 4-point harness system. STAY HYDRATED ON IN ACTION VERTICAL 10 comes with an included 2L/70oz Hydrapak Elite hydration bladder with Slide-Seal top and Plug-N-Play coupling for easier handling. The bladder sits tight thanks to the compression sleeve and the drinking tube attaches easily and securely with the tube clip. So, there's nothing to worry about here! Just focus on going forward on your adventure. CARRY YOUR GEAR Inside the main compartment there are several pockets for your gear and first-aid kit, and outside you have the Trekking Pole Carry making it easy to remove or replace poles while in motion. Easy and secure attachment for a bike LED-light and reflective points both at the front and back, we don’t want you to get run over now!

A lightweight hydration backpack supplying 4L of storage capacity to keep you running, riding, or skiing at full speed all day and night. Equipped with soft mesh highly ventilated shoulder and chest straps, built on our bounce free No Dancing Monkey 4-point harness system offering the best fit available in the market. - No Dancing Monkey 1.0 Harness-Zero bounce with our patented NDM technology - 2L Hydration system-Elite hydration bladder included. MULTI SPORTS BACKPACK WITH HYDRATION VERTICAL 4 Plus is a lightweight hydration backpack designed for the performance minded, multi-sport enthusiast who needs 4L of storage capacity to carry personal gear and hydration. Whether you need a running backpack, skiing backpack, bike backpack, or motocross backpack the VERTICAL got you covered. Equipped with soft mesh, highly ventilated shoulder and chest straps that allow normal breathing capacity and freedom to move. The lightweight back panel is also made with cool, breathable mesh. The VERTICAL 4 Plus offers the best fit available in the market with our award winning NDM 4-point harness system. STAY HYDRATED ON IN ACTION VERTICAL 4 comes with an included 2L/70oz Hydrapak Elite™ hydration bladder with Slide-Seal top and Plug-N-Play coupling for easier handling. The bladder sits tight thanks to the compression sleeve and the drinking tube attaches easily and securely with the tube clip. So, there's nothing to worry about here! Just focus on going forward on your adventure. CARRY YOUR STUFF Inside the main compartment there are several pockets for your gear and first-aid kit, and outside you have the Trekking Pole Carry making it easy to remove or replace poles while in motion. Easy and secure attachment for a bike LED-light and reflective points both at the front and back, we don’t want you to get run over now!

Zulo 2 is a special designed race hydration waistpack providing the perfect ergonomic fit on your hip. With its banana-shape and single-buckle secure suspension strap, the belt will be fixed on your waist without cramping your style and performance. It's equipped with a 1.0L/35oz Elite bladder with Plug-N-Play coupling, magnetic clip for the drink tube, smart multi organizer pocket and two quick stash side pockets for quick access to energy gels and food. - Single-buckle secure suspension strap - Won't affect balance (or style) by staying compressed and snug to your body - 1.0L Elite Hydration Bladder with magnetic clip for the drinking tube THE OPTIMAL MINIMALISTIC PACK FOR SERIOUS RIDERS The ZULO uses a compression strap system for a slim and secure profile, making the hip pack fit you perfectly and giving you zero bounce while in action. The cargo compression keeps your gear close to your body for better balance and increased pack stability while on the bike. It has a lightweight mesh back panel and is the optimal option for the serious riders who need to bring hydration without a backpack. The pack is carrying 2 liters of storage capacity and has food and gel pockets accessible while in action. The main organizer pocket keeps your tools and gear safe. It also comes with an easy and secure attachment for bike LED-light and visual reflective points on the front and back. STAY HYDRATED IN ACTION The hydration pack system comes equipped with a 1.0L/35oz Elite Hydration Bladder with plug-n-play coupling and a magnetic clip for the Hydraflex drink tube.

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

A clever handlebar bag that converts to a waist pack. Great for cameras, cell phones and other essentials you want close at hand. Rain cover included. - Divided main compartment, Two side zip pockets - Material: 1800 denier nylon - Max Load: 5kg / 11lb - Fully padded - Waist Belt, Carry handle, Rain cover, Yellow lining - QuickClick Handlebar Mount (Fixer 8) - Fits 25.4, 28.6 & 31.8mm handlebars - Size: 22 x 18 x 13cm / 8.7" x 7.1" x 5.1" - Weight: 334g / 11.78oz

Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender, too.

Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes with disc brakes, and has a center strip that acts like a short fender, too. Plus, it comes with a spring that folds up to clamp securely onto books, magazines and other thin objects.

Pack all the gear you need and enjoy the freedom of bikepacking. FrontLoader is perfect for carrying light yet bulky items like sleeping bags, camping gear and spare clothing. Featuring a tough outer support harness and constructed of durable abrasion- and water-resistant materials, it's easily installed or removed with two straps, special spacer mounts, and quick-release buckles. A backside head tube strap attachment increases load stability. An 8-liter removable waterproof drybag keeps contents completely protected from wet weather and splashes while a built-in air release button purges unwanted air from the bag to effectively compress its contents. - Material: Polyethylene / EVA / Anti-slip texture PU leather - Durable, water repellent and stain resistant - Bag Attachment: Durable NBR rubber spacers and straps with quick-release buckles - Waterproof Rating: 10,000 mm (waterproof carry bag) - Max Load: 5kg / 11lb - Waterproof carry bag - Air release button Size - 33 x 28.7 x 5cm / 13" x 11.3" x 2" - 50 x 15 x 15cm / 19.7" X 5.9" x 5.9" (Waterproof Carry Bag) Weight - Bag: 325g / 11.46oz (Black), 319g / 11.25oz (Green) - Rubber Spacers: 132g / 4.65oz

The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included

Epic offroad bike tours require you to bring all the essential tools and gear to keep from being stranded in the middle of nowhere. Designed to employ the unused space in your frame, MidLoader carries the heaviest items for your bike adventure. Constructed of lightweight, highly water-resistant and durable materials, it mounts and removes quickly with hook-and-loop fasteners. Two water-resistant zippered openings provide easy access to all your gear from either side. - Material: Polyethylene / nylon lightweight, durable, water repellent and stain resistant - Bag Attachment: Hook-and-loop fastener - Top Tube Diameter: Fits 45 - 66mm - Down Tube Diameter: Fits 38 - 70mm - Seat Tube Diameter: Fits 28 - 60mm Size - 3L: 37.5 x 12 x 6cm / 14.8" x 4.7" x 2.4" - 4.5L: 46 x 12 x 6cm / 18.1" x 4.7" x 2.4" - 6L: 54.5 x 13.5 x 6cm / 21.5" x 5.3" x 2.4" Weight - 3L: 277g / 9.77oz - 4.5L: 292g / 10.30oz - 6L: 337g / 11.89oz

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

Most of you don’t need the cargo capacity to land a helicopter on your rack. Sometimes, all you want to do is grab a sixer from the beer store on the way home, or pick up a nice bouquet of flowers. For whatever the situation dictates, Surly offers the 8-Pack Rack. Made from the same tubular cromoly steel as their front and rear touring racks, the 8-Pack Rack is a solid pedestal upon which you may rest a handlebar bag, grocery bag, minaudiere, satchel…or whatever you use to carry your bowling ball around. The 8-Pack Rack attaches to most forks with mid-blade and crown eyelets. It uses stainless steel hardware and has the characteristic durability, versatility, and repairability all Surly products are known for. The 8-Pack Rack has lots of barrel braze-ons, so you can customize your cargo tie-downs…or just bolt on as many lights as you can possibly find. It’s rated to carry up to 30lbs (13.6 kg) and comes in black or silver.