The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
CycleOps' Climbing Riser Block offers 3 levels of elevation to lift your front wheel and provide a workout simulating climbing hills. For steeper climbing workouts, 2 climbing blocks (sold separately) may be placed on top of each other for many different adjustment levels.
Blackburn's Sweat Net protects your precious bicycle and components from the corrosive effects of perspiration as you log indoor miles. It's made of washable terry cloth and fits most bicycles. - Fits most road and mountain bikes
Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only
The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds. The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store. The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers: - T1980 Bushido (ANT+) - T2020 i-Genius - T2050 Tacx IRONMAN trainer - T2060 Tacx IRONMAN Smart - T2080 Genius Smart with Upgrade Smart - T2170 i-Vortex - T2180 Vortex Smart with Upgrade Smart - T2240 Flow Smart with Upgrade Smart - T2780 Bushido Smart with Upgrade Smart
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
- Adapter for Tacx Direct Drive trainer - 01 is compatible with 142 x 12mm and 148 x 12mm - 02 is compatible with 135 x 10mm - 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive trainer), 142 x 12mm and 148 x 12mm - 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the thru axle mount on a Tacx NEO or FLUX Smart trainer.
$44.99 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
Bigger and Stronger for a Better Ride Featuring an improved ride feel and more accurate power measurements, this smart bike trainer has everything you need for an enjoyable and efficient indoor training session. - Ride hard. This trainer can handle sprints up to 2,000 watts. - Work up a sweat with inclines up to 16% that hold up to your most serious sprints. - Accuracy matters. Measure your power to within 2.5%. - Keep crushing it with your favorite apps, including Zwift and Tacx. - Finally, a trainer that won’t wake the whole house when you ride hard. ACCURATE AND RELIABLE This trainer is redesigned to let you track your performance and progress with reliable, consistent measurements. That includes power, speed and cadence, measured accurately within 2.5%. READY TO SPRINT The well-balanced design and large footprint of the FLUX 2 Smart trainer ensures maximum stability, even during the most explosive sprints, up to 2,000 watts. CLIMB HIGHER Get the most out of your intense workouts by training on realistically simulated inclines up to a 16% gradient. A MORE REALISTIC RIDE At 16.8 lbs (7.6 kg), a heavy flywheel ensures a realistic ride feel and good responsiveness. SMOOTH AND SILENT This direct-drive trainer is designed to bring vibration and noise levels to the absolute minimum, resulting in one of the most silent flywheel-equipped bike trainers available. IMPROVED COMPATIBILITY The trainer comes with additional axle adapters to significantly improve the axle compatibility. It is compatible with 142x12 mm and 148x12 mm axles — right out of the box. HIGHLY COMPATIBLE The FLUX 2 Smart trainer communicates via BLUETOOTH Smart technology and ANT+ FE-C protocol, so it works with a number of popular training apps such as TrainerRoad and Zwift. ABLE TO STAND ALONE You can opt to use the trainer in stand-alone mode. When not connected, it will simulate a flat road; the faster you ride, the higher the resistance. DEVICE COMPATIBILITY Connect FLUX 2 Smart to multiple devices simultaneously, so you can enjoy Tacx software and track your performance on your Garmin bike computer at the same time. TACX TRAINING SOFTWARE Enjoy a library filled with more than 100 high-quality, real-life videos that let you experience the rush of riding the steep hills of the Alps or the cobblestone roads of Milan. TACX TRAINING PLANS Take advantage of structured training plans, designed for your fitness level to help you meet your goals. Race live opponents, upload GPS data, ride with 3-D maps and more.
For year-round training and a fully interactive indoor cycling experience, the Flow Smart trainer offers everything you need. Its wheel-on design allows for easy setup and storage. It even connects to your favorite apps, such as Zwift, Tacx, and TrainerRoad. - Wheel-on design sets up with two easy clicks and securely locks in place - Measures speed, power, and cadence - Virtually silent flywheel lets you ride without disturbing others - Works with popular third-party training apps such as Zwift and Tacx - Train with realistically simulated inclines up to a 7% gradient FEATURES Type of trainer: Interactive Smart trainer with electric brake Magnets: 6 Magnets Transmission: Roller, 30mm Electrical requirements: 110-240 Volt Power indicator: None Connection indicator (ANT/BT): None Firmware upgradable: Yes Suitable bikes: Race, Tri, & MTB; if necessary with axle skewer; 29" wheel with Tacx trainer tire Suitable axles: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths also available Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS Max. power (40 km/h): 800 Watt Max. incline: 6% Simulation of descent: No Max. torque: 15.3 Nm Max. brake force: 45 N Flywheel: 1.6 kg Mass inertia: 11.8kg (26.0 lbs) Calibration: Spin down Footprint (lxw): 675 × 650 mm (26.6 × 25.6 in) Height: 410 mm (16.1 in) Dimensions when folded: 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in) Weight: 9.41 kg (20.7 lbs) Article number: T2240 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone Output: Cadence , Power , Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <5%
Looking for a smart, direct-drive trainer? The FLUX S Smart checks all the boxes: it’s reliable, accurate, silent, strong, and features a heavy flywheel for a very realistic ride feel. Made to help you sweat while cycling with your favorite apps, this bike trainer is the ideal indoor training companion. - Measure your power within 3% error tolerance - Next-to-silent direct drive trainer lets you ride without disturbing others - Works with popular third-party training apps such as Zwift and Tacx - Train with realistically simulated inclines up to a 10% gradient and a max sprint resistance of 1,500 watts - Sturdy design easily allows for riding full-out and standing on the pedals FEATURES Type of trainer: Interactive Smart direct drive with electric brake Magnets: 8 Permanent ferrite magnets & 8 electromagnets Transmission: None Electrical requirements: 110-240 Volt Power indicator: None Connection indicator (ANT/BT): 2 LEDs Firmware upgradable: Yes Suitable cassettes: Shimano & SRAM: 8 - 11 speed, Campagnolo. Not suitable for Specialized SCS system, SRAM XD and XD-R body sold separately Suitable axles: Road 130mm, MTB 135mm, 142mm & 148mm thru-axles. Adapter for 135 x 10mm available. Suitable bikes: Race, Tri, & MTB Supplied with: Quick release for road bikes and mountain bikes (5mm), Direct-drive quick release with adapter set for 142x12mm & 148x12mm thru-axles, 1 month Tacx Premium software SPECIFICATIONS Max. power (40 km/h): 1500 Watt Max. incline: 10% Simulation of descent: No Max. torque: 22.1 Nm Max. brake force: 65 N Flywheel: 7kg Mass inertia: 22.8kg (50.3 lbs) Calibration: Spin down Footprint (lxw): 670 x 642 mm (26.4 x 25.3 in) Height: 460mm (18.1 in) Weight: 22.8kg (50.3lbs) Article number: T2900S DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone Output: Cadence, Power, Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <3%
Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.
- Large and rollable trainer mat - Made from high quality, water-repellent 6mm thick foam - Protects your floor against scratches and sweat - Muffles noise and vibrations - 180 x 85 cm
Give your Galaxia or Anteres the best possible protection for storage or transport by using this sturdy trainer bag. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage. This bag is ideal for riders who take their rollers to the track with them to warm up.
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.
With the Tacx tablet stand you can place your tablet at a comfortable height and distance while using your bike trainer. Adjustable to different tablet sizes - length 182-267mm, width 112-197mm, max. thickness 13mm.
The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.
- Includes Sweatcover for Smartphone (T2931) and Towel (T2940) - 891076
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.
Take your ride inside with Tacx Boost. You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. Resistance can be controlled with a lever on the handlebar. The setup is easy—with just two simple clicks you mount your bike and you are ready to ride. SIMPLE SETUP With just two simple clicks, you'll be ready to ride. SMALL BUT STABLE This indoor trainer has a small footprint, 675 x 650 mm (26.6" x 25.6"), but provides a sturdy ride. EASY TO STORE Multifunctional front wheel support serves as a handle to carry the trainer and ensures a natural cycling position. MAGNETIC BRAKE You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. RESISTANCE CONTROL A simple lever on your handlebar lets you control the resistance; 10 levels, up to 1,050 watts. REALISTIC RIDE FEEL An actual flywheel generates a realistic and smooth pedal stroke. SMOOTH AND QUIET The closed resistance unit reduces noise and makes for a smoother ride. HOW FAR AND HOW FAST Add a speed sensor (sold separately) to track how far and how fast you're riding and train with some of your favorite apps. FEATURES - Magnets: 2x8 Permanent ferrite magnets - Transmission: Roller, 30 mm - Electrical requirements: No voltage required - Power indicator: None - Connection indicator (ANT/BT): None - Firmware upgradable: No - Suitable bikes: Road, Tri, & MTB with skewer quick release - Supplied with: Front wheel support, quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS - Max. power (40 km/h): 1050 Watt - Simulation of descent: No - Max. torque: 17 Nm - Max. brake force: 50 N - Flywheel: Actual of 1.6 kg - Mass inertia: 9.18 kg (20.2 lbs) - Footprint (LxW): 675 x 650 mm (26.6 x 25.6 in) - Height 410 mm (16.1 in) - Dimensions when folded 565 x 410 x 245 mm (22.2 x 16.1 x 9.65 in) - Weight 8.53 kg (18.8 lbs)
This narrow towel was developed specifically for indoor bike training sessions and is used by many professional riders during their warm-up or indoor training sessions. - Highly absorbent - Measures 30cm x 115cm
The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.
Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.
Look, your child is destined for greatness. We won't dispute that. But, why wait until they can walk for them to rock their awesomeness? If they're crawling, they're ready to explore the world. Attach the Strider Rocking Base to a Strider 12 Bike and get them rocking. The rocking base doesn't just familiarize them with a bike, the rocking motion helps develop their balance, spatial awareness, and core strength. No batteries. No annoying sounds. Just pure, rocking fun. - Compatible with the Strider 12 Classic, Sport, and Pro Balance Bikes - When the Strider 12" Bike is attached this product is intended for ages 6 months – 5 years old for Strider Sport and Pro, and ages 6 months – 3 years for Strider Classic.
Adapts a thru axle hub bike for a Saris bike trainer. - Trainer Thru Axle Adapter For Saris Trainers - Thread pitch: 1.00 & 1.75 What's Included: - Thru axle - Washers - Endcaps with bolts Trainer Compatibility The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. Bike Compatibility Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts
Connect your PC to CycleOps VirtualTraining.
Page 1 of 3 Next page