Pumps/Inflation

This sleek, lightweight and compact digital tire pressure gauge works seamlessly with Presta and Schrader valves without changing internal head parts. The digital gauge provides accurate pressure readings up to 260psi / 18bar. The illuminated 360º rotating gauge is easy to read from any angle in daylight or darkness. Compatible with bike / motorcycle / car tires, forks and shocks and the Air Pressure Adjusting Mode continuously reads pressure when using the air release button to fine tune tire pressure. - A digital air pressure gauge that accommodates both Presta and Schrader valves for tires shocks and forks with an easy valve type adjust lever - Features include: auto on 360 degree rotating head lit display and is capable of reading pressure while re

Prestacycle Alloy CO2 Pump is NOT a complete pump. Roughly the size of a CO2 cartridge and much lighter weight, this is your LAST CO2 cartridge. Simply attach it to your CO2 head, open the valve and pump! Eliminate CO2 range anxiety without having to carry a whole pump. If you use CO2, another pump head would be redundant. Capable of reaching 120+ psi, this is not the fastest pump, but a whole lot faster than walking. CO2 head required, not included. - Replace your spare CO2 Cartridge with a backup that never runs out - Same overall space as a CO2 Cartridge, and much lighter - Use your CO2 Head. No need to waste space and weight with a full pump - Compatible with Many Heads. (Push to inflate heads must be held open) - Engineered with a compression ratio to easily reach 120psi - End CO2 range anxiety, So much faster than walking! - Only 111mm (4.4?) by 20mm (0.8?) diameter - Weighs only 35 grams! - CO2 Head required, NOT INCLUDED - Presta ONLY. Most CO2 Heads only work on Schrader valves with high Cartridge pressure. Features: The ENDLESS spare CO2 Cartridge! The Prestacycle Alloy CO2 pump is the end of CO2 range anxiety. CO2 is great for fast, high pressure fill-ups, however, when you’re out, you’re out of luck! You can carry as many Cartridges as you think you need, now your last one can be endless. Same space as a cartridge, but lighter. CO2pump takes about the same space as a cartridge, but weighs only 35 grams. Unlike pumps, why waste space and weight to carry a pump head? Your CO2 Head is already a pump head with CO2pump. Although small, CO2pump is engineered to service high pressure. We designed a tiny pump with a compression ratio that enables you to reach 120psi without straining. With our design, smaller simply means more strokes, not a lack of pressure. Compatible with most brands of CO2 Heads*. Got a favorite CO2 Head? Already own one? CO2pump works great with most Heads. Simply attach the pump like a cartridge, open the valve and start pumping. *If your Head is a push-to-inflate head, you will need to hold the “push” action open while pumping. CO2pump is so much faster – than walking. No matter what goes wrong, inflation will not be the problem that keeps you flat. CO2pump will get you back on the road. Specifications: - Replace your spare CO2 Cartridge with a backup that never runs out - Same overall space as a CO2 Cartridge, and much lighter - Use your CO2 Head. No need to waste space and weight with a full pump - Compatible with Many Heads. (Push to inflate heads must be held open) - Engineered with a compression ratio to easily reach 120psi - End CO2 range anxiety, So much faster than walking! - Only 111mm (4.4?) by 20mm (0.8?) diameter - Weighs only 35 grams! - CO2 Head required, NOT INCLUDED Disclaimers CO2 Head required, not included. Compatible with most brands of CO2 Heads. Note: push to inflate heads need to be held in the inflate position while pumping.

The PFP-10 is a reliable floor pump that's equally at home in the garage, workshop or trailhead, with a long hose, extra-large foot pads and a giant easy-to-read gauge. The locking universal head automatically adjusts to fit both Presta and Schrader valve stems. - Compatible with Presta and Schrader valves - Maximum pressure: 160 PSI (11 bar) - One-year warranty — see Park Tool Limited Warranty

Built and designed for bicycles, the INF-2 utilizes a redesigned, more durable, dual-sided, 360º rotatable Presta and Schrader head. The INF-2 also sports a new, lighter weight body and a redesigned trigger to facilitate multiple hanging options. It features a built in pressure gauge (0–160 psi, 0–11 bars) with a protective gauge boot, and the body accepts any 3/8" NPT male threaded fitting. Built for everyday shop use and 100% rebuildable!

Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

The Muc-Off Inflator kits help riders quickly inflate their tires and quickly get back to riding in no time. Each kit contains 2x cartridges, 1x compact and durable CNC-machined inflator head with soft-touch press down button which easily controls CO2 release. Dual head nozzle compatible with Presta and Schrader valves and 1x neoprene sleeve to help avoid freeze burn. - Push design to easily control CO2 release - Stainless steel internal pin - Dual head nozzle, compatible with both Presta & Schrader valves - Compatible with most threaded 16g & 25g CO2 Cartridges - Two cartridges included

We've developed the best travel-ready bicycle floor pump for cyclists on the go. The Digital Travel Floor Drive has been built to be as efficient as possible while maintaining ultimate portability. It utilizes our traditional floor pump tech-an aluminum barrel, steel piston, and fully rebuildable internals-in addition to its innovative foldable stainless-steel feet, a low-profile ergonomic Composite Matrix handle, and an ultra-compact digital pressure gauge integrated into the hose. The hose is incredibly long at 99cm, making it functional with all bikes, even when they are mounted in repair stands. Weighing only 792 grams (1.75lbs), measuring 51cm long, and packing up to a scant 10cm wide makes it the most efficient floor pump for its size and portability. Capably provides up to 160 PSI (11 BAR).

The Pocket Drive is an amazingly compact and lightweight bicycle hand pump featuring plenty of pumping efficiency. It's constructed from durable CNC machined aluminum and has a handle that's lightly knurled for slip-resistant operation. With its overlapping handle and integrated ABS Flex Hose, the Pocket Drive offers performance unmatched for its size. The pump is Presta and Schrader valve compatible, and it's completely rebuildable for continued use at a high level. - 140mm, 79g - 160 psi, 11 bar - CNC machined aluminum construction with compact overlapping handle - Presta and Schrader valve compatible ABS Flex Hose - Includes Composite Matrix frame mount

Keep it classy Extend the hidden hose on the Air Support HP Pro pump, and thread it onto your Presta valve for secure inflation of your road tires. Designed with a smaller volume chamber for higher-pressure tires, this premium pump allows you to quickly inflate tires up to 120 psi. Stow it in your jersey pocket, or use the included bracket to mount it under your bottle cage. Product details - Premium-quality with smaller volume chamber for higher pressure tires - Inflate to 120 psi (8.25 bar) with little effort - Extendable, hidden hose reduces stress at valve when pumping at higher pressures - Threaded head securely locks onto Presta valves - Compact design fits snugly inside jersey pocket - Mounting bracket fits easily under bottle cage

A reliable floor pump featuring a durable steel barrel, an auto-select head, and a stable base. Fresh air for your tires Nothing slows a cyclist down like an inappropriate amount of tire inflation. Loaded with features like a stable, tip-resistant base, a durable steel barrel, and an auto-select head, the Charger stands ready whenever your tires need a little boost. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy-to-read 3-inch base-mounted gauge - Max pressure 160 psi (11bar)

A versatile floor pump that allows for easy transition between high volume and high pressure settings. A pump for road and MTB The Dual Charger Pump is versatile floor pump with multiple pressure settings that let you easily inflate high-pressure road tires and larger volume hybrid and MTB tires. A quick flip of the switch moves between settings, making it perfect for riders who own both a road and mountain bike. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy to read 4-inch base-mounted gauge - Base-mounted switch allows for easy transition between high volume and high pressure settings - High volume setting allows for quick inflation - High pressure setting allows for easy inflation as PSI increases - Max pressure 160 psi (11bar)

A compact, efficient way to hold flat fixing essentials so you can get back on the bike quickly. The Pro Flat Pack has everything you need to fix a flat and get back on the bike quickly in an aero, easy to grab package. This all-in-one kit provides essential items needed to fix a flat tire with additional pockets for money and ID, plus extra soft, padded materials to ensure you won't be bothered by the poke of a tool while it's stashed in your back pocket. - Tight fitting, stretch neoprene material zips open for easy access - All the items you need to fix a flat tire - Includes Air Rush Elite, CO2‚ inflator, two 16g CO2‚ cartridges, and a padded bag - Reusable hand insulation sleeve, vulcanizing patch kit - Room in the bag for ID, money, keys, and more

For the perfect pressure A shock pump with an accurate, easy-to-read gauge and a thread-on design that minimizes bleed off so you can easily adjust your shock pressure. The perfect pressure takes precision. The Bontrager Shock Pump features a large, easy-to-read gauge for accurate readings, a bleed valve for pinpoint accuracy, and a thread-on design that quickly attaches to front and rear suspension shocks for a reliable, secure connection. - Easy-to-read gauge that is accurate to 400 PSI - Threaded design for a secure connection that reduces bleed down - Bleed valve reduces pressure in small increments - Suitable for use with front forks and rear shocks

A floor pump and a tubeless setup tool in one. Set to Charge for a pressurized chamber that makes at-home and on-the-fly setup of tubeless ready (TLR) tires a breeze. Tubeless setup made simple TLR Flash Charger is the single-pump solution for daily use and at-home tubeless setup. It functions just like a standard floor pump when set to 'Inflate'. Switching it to 'Charge' gives the ability to pressurize a chamber and 'flash release' the stored air in order to seat tubeless tires without a bulky air compressor. Plus, it has a broad, back-lit digital gauge that delivers accurate pressure readings all the way to 160 PSI. Product details - Dual-chamber design with Inflate setting allows for efficient use as a traditional floor pump - Set to Charge for a pressurized chamber that inflates tubeless ready (TLR) tires without a compressor - Digital gauge provides easy-to-read accuracy up to 160 PSI (recommended maximum) - Compatible with both Presta and Schrader valves - Included inflation accessories conveniently stored in handle

The Wolf Tooth EnCase Pump offers easy access, quick use, and reliable performance for mountain, gravel, and fat bike tires. It requires less force per stroke than competitors, making it efficient for high-volume tires. The EnviroLock sealing protects internal components from water and debris. The pump is easily accessible when mounted on a frame, ensuring it remains clean and ready to use. Part of the EnCase System, The pump can store an EnCase System tools. - PSI: 70 - Weight: 153 - Valve Compatibility: Presta - Includes Mount Bracket: Yes

The Wolf Tooth EnCase Pump offers easy access, quick use, and reliable performance for mountain, gravel, and fat bike tires. It requires less force per stroke than competitors, making it efficient for high-volume tires. The EnviroLock sealing protects internal components from water and debris. The pump is easily accessible when mounted on a frame, ensuring it remains clean and ready to use. Part of the EnCase System, The pump can store an EnCase System tools. - Includes Gauge: No - PSI: 70 - Includes Mount Bracket: Yes - Weight: 95 - Valve Compatibility: Presta

The Wolf Tooth EnCase Pump offers easy access, quick use, and reliable performance for mountain, gravel, and fat bike tires. It requires less force per stroke than competitors, making it efficient for high-volume tires. The EnviroLock sealing protects internal components from water and debris. The pump is easily accessible when mounted on a frame, ensuring it remains clean and ready to use. Part of the EnCase System, The pump can store an EnCase System tools. - PSI: 70 - Includes Mount Bracket: Yes - Weight: 260 - Valve Compatibility: Presta

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Mounting Kit for Mountain Morph and Turbo Morph G.

Replacement parts for JoeBlow Pro and JoeBlow Booster.

The Gravel 2 Stage mini pump features an innovative 2 Stage pressure selector that lets you choose high volume or high pressure to quickly fill your gravel bike tire effortlessly. Compact size easily fits into a jersey pocket. - Presta valve with thumb lock & integrated dust cap - Aluminum Barrel

The Topeak JoeBlow® Tubi 2Stage makes installing tubeless tires quick and easy. The innovative Tubi-Head removes the Presta valve core – delivering massive air flow to rapidly seat and inflate tubeless tires with no pressure loss or messy sealant leaks! The 2Stage pump design delivers high pressure or high volume with a flip of the switch to quickly fill any size tire. Stage 1 opens both barrels for huge air volume, reaching 30 psi with 30% less effort. Stage 2 utilizes the small barrel for high pressure up to 160psi. The accurate dual scale gauge delivers precise readings from low pressure MTB and Fat Bike tires to high pressure Road bike tires – all from the same pump. Extra-long hose for added reach and durable steel barrel and large stable base makes this the perfect floor pump for all bikes. - Chuck head with extra-long 360 degree pivoting hose and built-in hose pressure release buttonFits Presta / Schrader valves (Schrader valve adapter included) - Painted steel / Anodized aluminum - 160 psi / 11 bar, 3” mid mount analog, Stage 1: 0 - 30 psi, Stage 2: 30 - 160 psi

Twin Turbo design allows for both high pressure and massive air volume all in one durable shop quality floor pump. - Push Pull stroke transfers air between two barrels for faster and more efficient inflation - Full Metal SmartHead with air release for Presta and Schrader valves - 3" top mounted air gauge rated up to 200 psi - Extra-long pump hose

Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.

The aero-shaped barrel and wide steel base provide stability when pumping and the 3” top mounted gauge is easy to read up to 200 psi (14 bar). The large padded handle provides comfort while the extra-long and tangle-free hose can even reach wheels on bikes mounted in a stand. The SmartHead DX3 with lower-profile air-release button automatically adjusts to fit either Presta or Schrader valves and makes getting the right pressure a simple task.

The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included

Topeak's Joe Blow Sprint quickly inflates tires thanks to its durable aluminum barrel, a sturdy steel base, a tight-sealing aluminum thumblock head that fits Presta and Schrader valves and an oversized, padded handle. And, the easy-to-read, top-mounted gauge lets you dial in the perfect pressure every time!

This pump is equipped with a hardened steel base, solid steel barrel, and an easy to read top mounted analog gauge. An extra long hose with a TwinHead pump head makes it easy to reach valve stems and the integrated mini tool carrier keeps what you need for light maintenance close at hand.

The JoeBlow Sport with unique 2-stage design delivers both high pressure and high volume in record time. Stage one opens both barrels for huge volume, reaching 30 psi with 30% less effort than standard floor pumps. Stage two utilizes the small barrel for pressures up to 160 psi. Hammer type TwinHead DX5 pump head with an extra-long and tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base provide extra stability. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel / anodized aluminum - Gauge: 160 psi / 11 bar, 3" mid mount analog Stage 1 : 0 - 30 psi Stage 2 : 30 - 160 psi - Volume Per Stroke: 715cc (Stage 1), 258cc (Stage 2) - Handle: Oversize / Dual density polymer - Base: Hardened steel - Ball / bladder heads, Hose dock - Size: 74 x 26.6 x 18cm / 29.1" x 10.5" x 4.6" - Weight: 2.5kg / 5.51lb

Topeak's Mini Dual is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, the thumb-lock head ensures an airtight seal on both Presta and Schrader valves.