Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Bottom Brackets

$39.95
Shimano's BB-UN55 Square Spindle Bottom Brackets are the unofficial standard for English-threaded cartridge bottom brackets. Quality, value, and durability come together to keep you cranking for many, many miles. - Fits JIS Square-Taper Cranksets - Hollow spindle - Crankarm fixing bolts not included
$359.00 - $459.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The ITA for SRAM DUB Road comes in two bearing options. The first option is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second option is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: Italian BB - Opening diameter: Threaded - Shell width: 70mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet - Spacer tube
$54.00
The SRAM DUB bottom bracket series has a simple job- to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard - Significantly lighter than GXP system
$63.00
Downhillers and freeriders need tough gear that can handle the abuse of big air and huge drops. TruVativ's Giga Pipe Team DH Bottom Bracket uses four sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.
$54.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Designed for use with SRAM Wide Cranksets - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
$263.00
The game-changing DUB family goes ceramic. While DUB has been simplifying the game, eliminating compatibility frustration and confusion for years, the DUB ceramic bottom bracket gives riders an additional option for even more silky-smooth performance. This is a whole other level in bottom bracket friction reduction, thanks to its high efficiency, ceramic bearings. What's more, the DUB ceramic bottom bracket can help riders save precious rotational energy without sacrificing the kind of robust seals required for real MTB and road racing scenarios. - High-efficiency ceramic bearings save riders rotational energy - Silky smooth, without sacrificing robust seals required for real-life durability MTB and racing scenarios - One oversized spindle to work across every bottom bracket standard - PF30 BB386 (Road: 86.5mm) Specifications: - Spindle Interface Type: SRAM DUB - Bottom Bracket Shell I.D.: 46 - BB Shell Width (mm): 86 - Defined Color: Black - BB/Frame Interface: 386 EVO - Weight: 150
$54.00
The new SRAM DUB bottom bracket series has a simple job: connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard. - Greater bearing durability - Easy installation - PressFit cups for lighter weight
$54.00
The SRAM DUB bottom bracket series has a simple job- to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard - Significantly lighter than GXP system - Asymmetrical fit is Cannondale specific - Aluminum press-fit cups are lightweight - Integrated adjuster
$46.00
The new SRAM DUB bottom bracket series has a simple job: connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard. - Significantly lighter than PFGXP system - Easier installation by allowing you to press the bearing cups into the frame
$263.00
Ceramic bottom bracket for DUB spindle cranks Specs: - BB Shell Type: BB30 - BB Shell Width: 73mm - BB Bearing: Ceramic - Crank Spindle Diameter: 28.99mm - Interface: DUB - Cup Diameter: 42mm
$263.00
- Ceramic bottom bracket for DUB spindle cranks
$46.00
The new SRAM DUB bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we’ve engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard. - Significantly lighter than PFGXP system - Easier installation by allowing you to press the bearing cups into the frame - Easy installation - Two fully sealed cartridge bearings - ISO 4210 compliant. See Declaration of Conformity for details. - BB-frame interface PressFit (MTB: 89/92mm) - Crank-BB interface DUB - Bearing type Standard - Spindle diameter DUB - Cup material Steel
$263.00
The SRAM DUB bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket specification. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket specification. - Significantly lighter than PFGXP system - Easier installation by allowing you to press the bearing cups into the frame - Sealed cartridge bearings available in both stainless and ceramic versions
$44.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
$54.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Designed for use with SRAM Wide Cranksets - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
$263.00
- Ceramic bottom bracket for DUB spindle cranks
Genuine replacement parts Revive your ride with a fresh set of bearings for your BB90/95 equipped carbon bike. Proprietary replacement bottom bracket for the Trek family of bikes. - Only compatible with 24mm cranks - Not compatible with BB30 cranks
$19.99
High performing square bottom bracket interfaces with English frames. - Fits square-taper spindle cranksets - Alloy adjustable cups - Includes 2 axle bolts
$59.00
- Die Cast then CNC-machined alloy bearing cups - Composite DI2 compatible adjustable center sleeve - 100mm for Fat Bikes - For use with 100mm MTB NBD MegaExo cranksets - Spindle Interface Type: FSA MegaExo - BB Shell Width (mm): 100 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English
$50.99 - $59.99
ISIS revolutionized bottom bracket spindles. Keep yours spinning smoothly with this Platinum ISIS Bottom Bracket from FSA. - Forged, hollow chromoly spindle with titanium nitride coating - Integrated, large ball bearing design - Cold-forged aluminum cups - Includes crank bolts
$115.99
The Hellbender 70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups
$263.00
- Ceramic bottom bracket for DUB spindle cranks Specs: - BB Bearing: Ceramic - Crank Spindle Diameter: 28.99mm - Interface: DUB
$212.00
Chris King ThreadFit 24 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #6 is designed to mate the ThreadFit 24 bottom bracket with a GXP spindle - Spindle Interface Type: SRAM/Truvativ GXP - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English
$74.00 - $118.65
The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 161g
$59.99
Race Face bottom brackets for use with 30mm spindle cranksets in the Race Face CINCH crank family. - Compatible with standard threaded BSA shells - Standard 6806 retainer bearings - Includes inner plastic sleeve and spacer; additional BB fitments can be accommodated with CINCH spacer kits - Inner sleeve protects against water - Rubber seal located on the bearing's external side helps to reduce the risk of water penetration
$59.99 - $74.99
Sealed and Delivered Bottom brackets are something you never think about until you do. With superior sealing and cable routing clearance, our 30mm Cinch BB92 will give you true peace of mind. This bottom bracket stands for precision and and durability. All About The Ball Bearings This BB uses 6806 retainer bearings packed with waterproof grease, along with improved wiper seals to ensure above-and-beyond durability and performance. Death to Creaks We fired up the ol' CNC machine to make sure the anodized alloy cups of this bottom bracket provide an exact, perfectly quiet fit in your frame. Weather, Or Not Features a built-in telescopic sleeve with improved sealing, keeping moisture from bearings and crank spindle. Plus, the sleeve provides more space for internal cable routing.
$36.99 - $43.99
Pressfit Model: • For use on BB86/92 bottom bracket shells • Compatible with 24mm spindle Hollowtech II cranksets • BB Shell Width (mm): 92 mm • BB/Frame Interface: BB86 , BB92 • Bottom Bracket Shell I.D.: 41 • Defined Color: Black • Spindle Interface Type: Shimano Hollowtech II Threaded Model: • Includes 3 x 2.5mm spacers • Includes TL-FC24 adapter tool • Reduced size for light weight • New seal construction for smoother rotation • Requires TL-FC34 or included TL-FC24 adaptor for installation & removal • BB Shell Width (mm): 68 mm • BB/Frame Interface: English • Defined Color: Black • Spindle Interface Type: Shimano Hollowtech II • Weight: 77 g
$55.00 - $100.28
External English (BSA) threaded bottom bracket for 73mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 1.8mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 0.7mm aluminum BB cup spacers for use with 68mm wide BB shell (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers (1) - Wave Washer Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68-73mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 116g
$64.99 - $79.99
- Double row bearings improve lifespan with enhanced durability - Allows the use of a 30mm spindle with Shimano press fit shells - Bearings races are fully coated for improved corrosion resistance - Bearings are factory filled with Phil Wood grease
$218.75
Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 29mm spindle (SRAM DUB) cranks in your frame. These bearings fit directly in frames with 41mm ID bottom bracket shells. Crankset spindle length must be longer than 104mm when used in a 86.5mm wide BB shell. - Bearings: Enduro Dual-Row ABEC-3 - Color: Silver - Bottom Bracket/Frame Interface: BB86, BB92, PF90, BB104/107, PF121, PF132 - Bottom Bracket Shell Width: 86.5mm - 132mm - Bottom Bracket Shell I.D.: 41mm - Flange OD: 42mm - Crank Spindle Diameter: 29mm (DUB) - Over Bearing Width: 92mm in 86.5mm wide shell (Dimensions include supplied silicone dust shields) - Weight: 90g Complete kit for one frame includes: - (2) Enduro BB86 to 30MM Dual-Row ABEC-3 Bearing - (2) 0.5mm crank spacer - (2) 1.0mm crank spacer - (2) 5.0mm crank spacer - (2) Dust seals
Page 1 of 8 Next page