Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools/Maintenance

- Includes: Footwear Shield, Bike Shoe Cleaner, Foam Fresh, premium Shoe Brush, Microfibre cloth and storage tote bag - Bike Shoe Cleaner removes dirt, grime and odors - Footwear Shield is a spray on water repellant - Foam Fresh helps break down hard to remove dirt and grime
A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.
Designed and built to remove and install the direct mount lockring that retains front chainrings found on some Specialized, Cannondale and FSA modular cranks. - Fits chainring of Specialized, Cannondale and FSA - For lockrings with 47–48mm outside diameter and 4 or 8 notches - Fits both 4 notch (FSA and Cannondale) and 8 notch (Specialized) lockrings - 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque - Constructed of 4140 heat-treated steel and plated for long life
Park Tool's Bottom Bracket Bearing Tool Set removes and installs (with a bearing press which is sold separately) BB86, BB90, BB92 and Press Fit bottom brackets from Shimano, Race Face, SRAM and others that use a nominal 24mm-diameter spindle. This tool has a bearing remover that fits inside the bottom bracket shell and into the bearing so the bearings can be tapped out of the frame with a hammer. The set also includes two bushings that you use in conjunction with a bearing press for precision bearing installation (bearing press sold separately).
Park's SuperGrip Carbon Assembly Compound is a combination of grease and tiny particles and is ideal for lubricating, protecting and tightening carbon components, like seatposts, handlebars and stems. SuperGrip solves the problem of carbon parts moving and slipping, which can happen if they are not lubed, or you apply standard grease or lube to them. It also works well with aluminum and steel components.
These Vise Blocks are used to remove the fork sealhead. - Diameter: 27.35mm Compatibility: - RVL RC - Yari RC - BoXXer RC - SID Select - Pike Select - Lyrik Select - BoXXer Select
- High quality Kraftform Plus screwdrivers. - Multi-component Kraftform Plus handle - Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. - The tips are microscopically roughened for optimal bite to the screw. - "Take it easy" tool finder with color coding according to profiles and size stamp - The hexagonal anti-roll feature
- Bit socket with 1/4 inch drive and holding function. - "Take it easy" Tool Finder with color coding according to size
- High quality L-key set with color coded - Wear-resistant clip material ensures secure storage of the L-keys as well as simple removal. - Hex-Plus profile offers a greater contact surface in the head of the screw. - Ballpoint on the long arm allows dependable working even in difficult installation situations. - Holding function holds screws securely on the tool. - The BlackLaser surface treatment provides surface protection, even against corrosion, and a long service life. - Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing.
- Joker 6003 pedal size 15 with flat mouth to mount and dismount pedals - Particularly suitable for narrow wrenching situations on the bike - The special mouth geometry expands the placement possibilities of the tool - The low return angle in the mouth "takes" the screw every 15° - Slim ring side angled by 15°
$0.86 - $5.95
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs
$0.94
This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.
$1.36
Precision brake bleeding tools and adaptor kits for Magura brake systems.
$1.95
Fits all 1/4-inch socket-type torque wrenches for use with the Prestacycle Bicycle Bit Set. Prestacycle's bits cost 1/10 the price of buying socket head sets to meet all the requirements of bicycles. Using bits allows you to perform initial installation with Prestacycle's reversible mini ratchet – then leave the bit inside the job – remove the mini ratchet – and connect your torque wrench onto the bit to finish final tightening.
$2.50
Specially formulated low-friction lubricant for the seals and bushings of the air chamber for front and rear Fox Racing Shox. Float Fluid is the recommended lube for use with Fox forks and shocks. - Use when rebuilding Fox suspension to lubricate foam rings and seals - Corrosion inhibitor
$3.73
High-quality bits for recessed Torx Plus screws. Torx Plus profile: in comparison to normal Torx profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced. - For Torx Plus screws - Particularly hard for semi-hard materials - 1/4" hexagon drive - High torque transfer - Size: 40 IP x 25mm
$3.95
Refill pack for the Park Tool TPT-1 Tubeless Plug Tire Tool and other similar tools. These vulcanized rubber plugs are used to temporarily repair punctures in tubeless bicycle tire systems. Set of 5. NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.
$3.95 - $8.55
High-quality Wera L-keys with color-coded, convenient plastic sleeve. The tool is quickly accessible and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. - L-keys for hexagonal socket screws - Hex-Plus allows socket head screws to live longer - Color coded, easy-to-grip plastic sleeve, even at low temperatures - Hexagonal ballpoint on the long arm - Wear-resistant size marking
$3.99 - $18.99
- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air
$3.99
Put these beauties in your tool kit for quickly fixing flats on the road. - Light weight, low profile lever - Durable composite construction - Easy to get under the tire bead - Set of three levers to assist with hard-to-remove tires - Included cap keeps the set together
$3.99
- Microcell is ergonomically contoured for maximum comfort and surface area
$4.00
Brake pad spreader tool for Avid Elixir brakes.
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes
$4.00
Getting a flat is a pain in the butt. It's an even bigger pain in the butt if you don't have the stuff you need to get back home. These patches will help get you back to where you need to be. - Six patches - Sandpaper - Instructions included
$4.00
Tools for repair and maintenance of RockShox Reverb suspension seatposts. - Specific to RockShox Reverb post
$4.00
To adjust preload on Hollowtech II cranksets
$4.04 - $7.78
High-quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. "Take-it-easy" Tool Finder: color coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. - Hexagonal screwdriver hex-plus - Multi-component Kraftform handle for fast and ergonomic screwdriving - Take-it-easy tool finder: color coding according to profile and size - Hex-plus allows socket head screws to live longer - Hexagonal anti-roll feature against rolling away
$4.95
Get those heads sealing like new and reduce compressor energy waste with Park Tool's Head Seal Kit. This kit will help get rid of that hissing sound you've been hearing when it has been too long since servicing your Park Tool INF-1 or INF-2 shop inflator. Kit includes: - 1 #1586 Presta Seal - 1 #1588 Schrader Seal - 2 #1576-2 O-rings for Shuttle-valve - 1 #1682-2 O-ring for INF-1 and INF-2 Head Adaptors
$4.95
• Updated with a new material and new design • Features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed • Perfect for tight beads and tubeless tires • Sold in sets of two.
$4.99 - $9.99
Muc-Off Device Cleaner spray bottle contains an advanced pH balanced, eco-friendly cleaning formula that gives a streak-free finish for phones, tablets and laptops. It’s never been easier to keep your devices bacteria-free with the Muc-Off treatment. - Gives devices a streak-free finish - Formulated using deionized water and is pH neutral - Store in a cool dry place
Page 1 of 39 Next page